TREND H/JIG/CK HINGE JIG SKELETON TWO PART KIT

Skeleton Hinge Jig Kit supplied with CraftPro cutter and Corner Chisel
It is easy to use with minimal setting-up time, completing the job both accurately & quickly.
Used on-site & in joinery shops to increase productivity with excellent results.
Fully adjustable apertures for fire door requirements and renovation work.
Can be used on both inside and outside doors, rebated frames and on maximum 25mm thick fixed stops.
Ideal for fitting a new door in an old frame.
No need for marking out in the conventional way.
Quick & simple to set-up as the hinge is used as the pattern.
Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges.
Use with a light duty plunge router with 1/4 inch collet.
Long reach router cutter required, 12mm diameter with 70mm overall length.
Adjustable edge guides with preset for hinge of 20mm, 25mm and 30mm
Unibase may be needed.
Patent No. GB2490139
T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160.

Dimensions:
Length min.=2 5/8" (67 mm)
Length max.=5" (127 mm)
Width min.=1/2" (12.7 mm)
Width max.=1 3/8" (35 mm)
Width max. in 35mm rebate=23 mm
Width max. in 44mm rebate=32 mm
Door sizes possible
Height min.=6' 5" (1956 mm)
Height max.=2100 mm* (6' 10"*)
Thickness min.=5/8" (16 mm)
Thickness max.=2" (51 mm)
Edge stops thickness=6 mm
Weight= 2.9 kg
Jig overall length=1956 mm
Plate thickness=3 mm
Fixed stop max. thickness=25 mm**
* Please note for doors over 2040mm the bottom hinge will be higher than 9" up.
** Max. hinge leaf width 22mm (35mm doors)
Cutter dimensions
C=19 mm
D=12 mm
OL=71 mm
Shank Diameter=1/4 inch