Festool 491038 Groove Router Cutting Disc HW HW D40x1,5

Functions

The groove depth can be determined via three different cutter spindles. Variant 1 without a ball bearing must be used with a parallel side fence, variant 2 with a 16 mm ball bearing and variant 3 with a 28 mm ball bearing.

 

The carbide-tipped disc groove cutter is perfectly suited to creating grooves for seals or for parquet touch-up

Cutter replacement is done quickly and easily via a screw on the cutter spindle

carbide-tipped cutters

various routing depths can be realised by different cutter spindles

 

Main applications

Make grooves on the front using cutter discs with a cutter width of 1.5 mm to 5 mm

The milling discs can be combined with the cutter spindle without ball bearing or with a ball bearing Ø of 16 or 28 mm

 

Technical Data



D 40.00 mm

Dia. 6.00 mm

NL 1.50 mm